07.CHAPTER3_EN 2/5/03 12:34 AM Page 2
O P E R AT I O N
4
Press the LEFT/RIGHT
button to select the desired video signal source.
Press the MENU button to enter the video signal source, and then the “Ant Input check” is automatically displayed.
5
Make sure that the antenna is connected to the TV.
Press the LEFT/RIGHT
button to activate "Auto Program" or press the MENU button to skip. (refer to “Auto program” on page 3.6.)
6
The message
“Enjoy your watching.” is displayed.
7
If you want to reset this feature
(1)Press the MENU button.
(2)Press the DOWN button to highlight the “Function” menu and
press the RIGHT button.
(3)Press the DOWN button to select Plug & Play and press the
RIGHT button. The message “Plug & Play” is displayed.
3.2 CHAPTER THREE: TV OPERATION