07.CHAPTER3_EN 2/5/03 12:34 AM Page 6

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~2 on previous page.

Press the MENU button.

Press the DOWN button to select “Channel”, then press the RIGHT button.

2

Press the DOWN button to select “Auto program”.

3

Press the RIGHT button.

The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto program menu reappears. Press the MENU button to exit.

The TV automatically cycles

through all of the available channels and stores them in memory. This takes about one to two minutes.

Press RIGHT at any time to interrupt the memorization process and return to the CHANNEL menu.

3.6 CHAPTER THREE: TV OPERATION

Page 28
Image 28
Samsung LTM 225W manual Storing Channels in Memory Automatic Method