Wireless network setup
160
2. Using a Network-Connected Machine
Even if your computer is running Windows 7 or higher, you cannot use this
feature if your PC does not support wireless network. Set the wireless
network using a USB cable (see "Access point via USB cable" on page 155).
If below screen appears, press the (WPS) button from the control
panel within 2 minutes.
7 When the wireless network set up is completed, click Next.
8 Follow the instructions in the installation window.
16

Setup using Mac

Access point via USB cable

Items to prepare
Access point
Network-connected printer
Software CD that was provided with your machine
A machine installed with a wireless network interface
USB cable
1Make sure that the machine is connected to your computer andpowered
on.
2 Insert the supplied software CD into your CD-ROM drive.