Wireless network setup
158
2. Using a Network-Connected Machine
9 When the wireless network set up is completed, disconnect the USB
cable between the computer and machine. Click Next.
10 Follow the instructions in the installation window.
Access point without a USB cable (recommended)
Items to prepare
WiFi-enabled PC running Windows 7 or higher and an access point (router)
Software CD that was provided with your machine
A machine installed with a wireless network interface
While setting the wireless network, the machine uses PC's wireless LAN. You
might not be able to connect to the Internet.
Creating the infrastructure network
1Turn on your computer, access point, and machine.
2 Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing “X” with the letter, which represents your CD-
ROM drive and click OK.
3 Review and accept the installation agreements in the installation
window. Then, click Next.