Samsung M207x manual Next, If the screen does not appear, go to step, WEP Key Index

Wireless network setup

11 If Wireless Settings screen appears, select Using a USB cable and click	12 After searching, the window shows the wireless network devices. Select
Next.	the name (SSID) of the access point you want to use and click Next.
If the screen does not appear, go to step 15.
	When you set the wireless configuration manually, click Advanced Setting.
	• Enter the wireless Network Name: Enter the SSID of the access point
	(SSID is case-sensitive).
	• Operation Mode: Select Infrastructure.

• Authentication: Select an authentication type.

Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.

Shared Key: Authentication is used. A device that has a proper WEP key can access the network.

WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on the WPA Pre-Shared Key. This uses a shared secret key (generally called Pre Shared Key pass phrase) that is manually configured on the access point and each of its clients.

• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES, TKIP, AES)

• Network Password: Enter the encryption network password value.

• Confirm Network Password: Confirm the encryption network password value.

• WEP Key Index: If you are using WEP Encryption, select the appropriate

WEP Key Index.

The wireless network security window appears when the access point has security enabled.

Enter the Network Password of the access point (or router).

2. Using a Network-Connected Machine 162