Samsung M207x manual Receiving setup, To change the menu options, Drpd Mode

Fax menu

5

Receiving setup

Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine (see "Menu overview" on page 31).

To change the menu options:

•Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.

•Or press Setup > Machine Setup > Default Setting > Fax Default.

Item	Description
Receive Mode	Selects the default fax receiving mode.
Ring To Answer	Specifies the number of times the machine rings before
	answering an incoming call.
	Automatically prints the page number, and the date
Stamp RCV Name	and time of reception at the bottom of each page of a
	received fax.
	Initiates fax reception from an extension phone
	plugged into the EXT socket on the back of the
Rcv Start Code	machine. If you pick up the extension phone and hear
	fax tones, enter the code. It is preset to *9* at the
	factory.

Item	Description
Auto Reduction	Automatically reduces an incoming fax page to fit the
	size of the paper loaded in the machine.
Discard Size	Discards a specific length from the end of the received
	fax.
	Blocks any unwanted faxes that you stored in the
Junk Fax Setup	memory as junk fax numbers. This setting may not be
	available depending on your country.
	Enables a user to use a single telephone line to answer
	several different telephone numbers. You can set the
DRPD Mode	machine to recognize different ring patterns for each
	number. This setting may not be available depending
	on your country (see "Receiving faxes using DRPD
	mode" on page 232).

3. Useful Setting Menus 184