Samsung MF68-00389A-00, SL10D10 manual Receiver LCD Panel, Operations on the LCD Panel

Getting Connected

TIP

The Setup Procedures to Use the

Volume Button on the Remote

Control

If the Volume button on the remote control does not work or the remote control has been reset, set up the Volume button according to the following procedures.

1)Move the mode switch to TV.

2)Press and hold the MUTE and SELECT keys until a light above the mode switch on the remote flashes twice.

3)Enter 1-0-7-6-6 in turn.

4)Move the switch back to DIRECTV

VOLUME

Receiver LCD Panel

1 2 3

Your equipment may not look exactly like the model illustrated.

1)MENU – The menu appears and the previous level menu exits.

2)–/+ Sign – Adjust an option value respectively.

3)VOLUME – Use to control the volume.

Operations on the LCD Panel

1)Press the on the LCD front panel.

2)Use the –/+Sign to move to an item you wish to select.

3)Press the to select the item you wish to adjust.

4)Use the –/+Sign to adjust according to your preferences. The adjustment item is highlighted in red.

The new setting is applied.

5) When finishing the setting, select EXIT from the menu to exit.

Even when not selecting the EXIT menu, the menu automatically disappears after a few seconds.

12Getting Familiar