Safety instructions
instructions Safety
B.Do NOT place any object between the oven door and front face or allow food or cleaner residues to accumulate on sealing surfaces. Ensure that the door and door sealing surfaces are kept clean by wiping after use first with a damp cloth and then with a soft dry cloth.
C.Do NOT operate the oven if it is damaged until it has been repaired by a qualified microwave service technician trained by the manufacturer. It is particularly important that the oven door closes properly and that there is no damage to the:
1)door (bent)
2)door hinges (broken or loose)
3)door seals and sealing surfaces
D.The oven should not be adjusted or repaired by anyone other than a properly qualified microwave service technician trained by the manufacturer.
Samsung will charge a repair fee for replacing an accessory or repairing a cosmetic defect if the damage to the unit and/or damage to or loss of the accessory was caused by the customer. Items this stipulation covers include:
A.A dented, scratched, or broken door, handle,
B.A broken or missing tray, guide roller, coupler, or wire rack.
•Use this appliance only for its intended purpose as described in this instruction manual. Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur. It is your responsibility to use common sense, caution, and care when installing, maintaining, and operating your appliance.
•Because these following operating instructions cover various models, the characteristics of your microwave oven may differ slightly from those described in this manual and not all warning signs may be applicable. If you have any questions or concerns, contact your nearest service centre or find help and information online at www.samsung.com.
•This microwave oven is supposed for heating food. It is intended for domestic
•Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possible result in a hazardous situation.
Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. Please contact your local authorities in regard to the environmentally safe disposal of this product.
Product and its cord in compliance with SASO/IEC tropical temp.rise requirements, and, cross section is the only discrepancy, and it won’t affect safety, meanwhile, it is not practical to change the power cord, e.g. too small chamber.
12 English
MG40J5133AT_ZA |
|
| |
|
| ||
|
|
|
|