Samsung ML-1430 manual See Printing on Labels on, See Printing on Transparencies on

Paper Specifications

Labels

CAUTIONS:

•To avoid damaging the printer, use only labels recommended for laser printers.

•To prevent jams, always use the face-up output slot.

•Never print on the same sheet of labels more than once or print on a partial sheet of labels.

When selecting labels, consider the quality of each component:

•Adhesive: The adhesive material should be stable at 200 °C (392 °F), the printer’s fusing temperature.

•Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets with spaces between the labels, causing jams.

•Curl: Prior to printing, labels must lie flat with no more than 13 mm (.5 in.) of curl in any direction.

•Condition: Do not use labels with wrinkles, bubbles, or other indications of separation.

See “Printing on Labels” on page 4.10.

Transparencies

Transparencies used in the printer must be able to withstand 200 °C (392 °F), the printer’s fusing temperature.

CAUTION: To avoid damaging the printer, use only transparencies recommended for use in laser printers.

See “Printing on Transparencies” on page 4.11.

APPENDIX A.9