Samsung ML-2150 manual Configuring TCP/IP, Static Addressing

Configuring TCP/IP

Your printer can be set up on a variety of TCP/IP networks. There are several ways in which your printer can be assigned a TCP/IP address, depending on your network.

•Static Addressing: TCP/IP address is assigned manually by the network administrator.

•Dynamic Addressing BOOTP/DHCP(default): TCP/IP address is assigned automatically by the server.

Static Addressing

To enter the TCP/IP address from your printer’s control panel, take the following steps:

1Press the Menu button () until you see “Network” on the bottom line of the display. Press the Enter button () to access the menu.

2Press the Enter button () when “Config Network” displays on the bottom line.

3Press the scroll button ( or ) to display “Yes” and press the Enter button ().

4Press the Upper Level button ( ), then use the scroll button ( ).

5Press the Enter button () when “Config TCP” displays.

6Press the scroll button ( or ) to display “Yes” and press the Enter button ().

7Press the Upper Level button ( ), then use the scroll button ( ).

8Press the Enter button () when “IP Get Method” displays.

9Press the scroll button ( or ) to display “Static” and press the Enter button ().

10Press the Upper Level button ( ), then use the scroll button ( ).

E.8 USING YOUR PRINTER ON A NETWORK