Review the precautions on page F.2 and then follow this procedure to install the network or serial interface card option in your printer.

1Unpack the network or serial printer card. Make sure that there is no missing or damaged part.

2Turn the printer power off and unplug all cables from the printer.

3Remove the two screws on the back of the printer, then remove the control board cover.

4Remove the two screws and the bracket from the control board. You can discard the old bracket.

F

PROGRAMME INSTALLING PRINTER OPTIONS F.7

Page 214
Image 214
Samsung ML-2150 manual Programme Installing Printer Options F.7