Samsung ML-2150 Before printing the last page of a print job, Prints the page in the print buffer

Item	Explanation
	Values: 0 ~ 300 sec *15 sec
Job Time	You can set the time length the printer waits
	before printing the last page of a print job
Out
	that does not end with a command to print
	the page.
	When a print time-out occurs, the printer
	prints the page in the print buffer.
	This item is only available if the optional
	serial interface card is installed in your
	printer. For details, see page F.6.
	• Baud Rate: Lets you select the rate at
	which data is being sent to or from your
	computer using the serial communication.
RS-232C	Note that using a setting higher than
	19200 bps with the COM port may cause
	unexpected errors in DOS mode.
	• Robust XON: Turns use of XON/OFF of
	serial communication control on or off.
	When this item is set to On, the printer
	sends a continuous stream of XONs to the
	computer to indicate that the serial port is
	ready to receive more data.

This item allows you to maintain the toner cartridge.

•OPC Cleaning: Cleans the OPC drum of the cartridge and produces a cleaning sheet with toner debris on it.

Maintenance • Fuser Cleaning: Cleans the fuser unit inside of the printer and produces a cleaning sheet with toner debris on it.

•Remain Toner: This item allows you to check how much toner are left in the cartridge.

3

USING THE CONTROL PANEL 3.15