Samsung ML-2150 manual For Network Printing, Using an Ethernet Cable, Using a Network Antenna

For Network Printing

You can attach your ML-2151N or ML-2152W printer to a network using an Ethernet cable (UTP cable with RJ.45 connector).

ML-2152W also has a network antenna which allows you to use a wireless LAN interface.

If you are a ML-2150 user, you need to install the optional network interface card. For a ML-2151N printer, you can replace the network interface card to one supporting the wireless LAN interface. For details about installing the card, see page F.6.

Using an Ethernet Cable

1Make sure that both the printer and the computer are turned off.

2Plug one end of the Ethernet cable into the Ethernet network port on the Printer.

To the network LAN connection

3Plug the other end of the cable into a network LAN connection.

See your computer User’s Guide, if you need help.

Using a Network Antenna

1Screw the wireless network antenna counterclockwise into the port.

2.12 SETTING UP YOUR PRINTER