Samsung NX1 user manual Flash, 116, Clearly

Shooting Functions

Flash

In order to capture a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use a flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject.

To set flash options,	In Shooting mode, press [m]	b Flash 
	an option.

Icon Description

Off: The flash is off.

Smart Flash: The camera automatically adjusts the brightness of the flash according to the amount of light in the surrounding environment.

Auto: The flash automatically fires in dark locations.

Auto Red-eye: The flash automatically fires and reduces red-eye.

Fill in: The flash fires whenever you capture a photo. (Brightness is automatically adjusted.)

Fill-in Red: The flash fires whenever you capture a photo and reduces red-eye.

1st Curtain: The flash fires immediately after the shutter opens. The camera captures a photo of a subject earlier in an action sequence

clearly. Ball moving direction

Icon Description

2nd Curtain: The flash fires just before the shutter closes. The camera captures a photo of a subject later in an action sequence

clearly. Ball moving direction

Hi-speed: If the shutter speed is faster than the camera’s sync speed (the quickest time taken to open and close the shutter), the flash will fire multiple times at high speed. The flash starts to fire while the shutter opens. This option can be set only when you attach a compatible, optional external flash. (SEF-580A)

• The available options may differ depending on shooting conditions.

•There is an interval between two bursts of the flash. Do not move until the flash fires a second time.

•If you select Off, the flash does not fire even when an external flash is attached. If you adjust the flash intensity manually, the flash will fire once without a pre-flash.

Use only Samsung-approved flashes. Using incompatible flashes may damage your camera.

116