My Camera > Accessories

Connecting the external flash

1Remove the hot-shoe cover from the camera.

2 Mount the flash by sliding it into the hot-shoe.

3Rotate the hot-shoe fastening dial as shown in the illustration to lock the flash into place.

4Slide the power switch towards ON to turn on the flash.

You can capture a photo with a flash that is not fully charged, but it is recommended to use a fully charged flash.

The available options may differ depending on the shooting mode.

There is an interval between two bursts of the flash. Do not move until the flash fires a second time.

For more details about optional flashes, refer to the user manual for the flash.

Use only Samsung-approved flashes. Using incompatible flashes may damage your camera.

65

Page 66
Image 66
Samsung NX1 user manual Connecting the external flash