Samsung NX1 user manual When Baseball is selected, When Trap Shot is selected

The camera may not take the photo properly under the following conditions: - When the size of the subject is too small.

- When the subject is moving quickly.

- When there are moving objects in the background.

- When you take photos in dark, indoor areas, such as an indoors sports complex.

My Camera > Shooting modes

When Baseball is selected

The camera automatically takes the photo when it detects a ball at the estimated hitting point that you set.

To position the vertical line on the hitting point, drag the vertical line on the screen, scroll command dial 1 or 2, or rotate the navigation button.

To change the location of the batter and the ball, tap and drag the vertical line to the batter‘s location facing the pitcher. You cannot drag the line into the opaque area on the screen.

• The camera may not take the photo properly under the following conditions:

-When shooting outside of a ± 20° angle of view from a batter‘s side (in the direction of a ball’s path).

-When the estimated hitting point is outside of the selectable area.

-If there is a net or fence between you and the subject.

•The camera may take a photo even when it does not detect a ball, such as when the subject is backlit, when you take photos indoors, or when you take photos without using a tripod.

When Trap Shot is selected

The camera takes photos continuously when it detects the subject moving in the direction of the arrow at the line that you set.

To position the vertical line on the screen, drag the arrow icon on the vertical line to the desired point, and scroll command dial 1 or 2, or rotate the navigation button.

You can also touch the area on the screen where the subject is expected to pass through or manually adjust the focus by rotating the focus ring after half-pressing [Shutter].

• When you select Trap Shot, the Direct Manual Focus (DMF) function is automatically set.

•When you select Trap Shot, the AF mode is set to Single AF and the AF area is set to Selection AF.

•The area where the subject is expected to pass through must be in focus.

•You cannot drag the line into the opaque area of the screen.

•Subjects that are moving in the same direction may not be detected properly depending on the angle of view or the size of the subjects.

•

83