Appendix

Updating the firmware

Connect the camera to the computer and update the firmware of the camera or the lens.

You cannot run a firmware update without a fully charged battery. Recharge the battery fully before running a firmware update.

If you update the firmware, user settings and values will be reset. (Date, time, language, and video out will not change.)

Do not turn the camera off while the update is in progress.

1 In Shooting or Playback mode, press [m] q USB Connection Mass Storage. (p. 194)

2Turn off the camera.

3Connect your camera to the computer with the USB cable.

You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data.

If you try to plug the USB cable into the HDMI port, the camera may not work properly.

When using a USB 2.0 cable, plug the USB cable into the lower part of the USB port. If the plug connectors are forced, the device may be damaged. The manufacturer is not responsible for any loss of data.

When using a USB 3.0 cable (optional), connect the USB cable as shown in the illustration.

216

Page 217
Image 217
Samsung NX1 user manual Updating the firmware, 216