Connecting & Transferring > Connecting to a smart phone

4Select the camera from the list on the smart phone.

The smart phone can connect to only one camera at a time.

If the Wi-Fi Privacy lock is enabled and Wi-Fi is connected, enter the PIN displayed on the camera to the smart phone.

5On the camera, allow the smart phone to connect to your camera or confirm the registration request.

If the smart phone has been connected to your camera before, it is connected automatically.

If the pop-up message that prompts you to set the auto time setting appears, select Yes to sync the camera’s date and time to the smart phone’s. (p. 195)

6On the smart phone, select qto open the smart panel.

7On the smart phone, set the shooting options.

While using this feature, some buttons are not available on your camera.

The zoom button and the shutter button on your smart phone will not function when using this feature.

Some shooting options are not supported.

Shooting options that you have set will remain on the camera after the connection with the smart phone has ended.

8Touch to return to the shooting screen.

9On the smart phone, touch and hold to focus, and then release it to capture the photo.

Touch to record a video and touch to stop a video.

Touch to view the captured photo and send it to the smart phone.

If the GPS feature is activated on the smart phone, the GPS information will be saved with the captured photo.

When you use this feature, the ideal distance between the camera and the

smart phone may vary, depending on your surroundings.

The smart phone must be within 23 ft (7 m) of the camera to use this feature.

It will take some time to capture the photo after you release on the smart phone.

The Remote Viewfinder function will deactivate when: --You answer an incoming call on the iOS devices.

--There is an incoming call on the smart phone. --Either the camera or the smart phone turns off. --The device loses a Bluetooth or Wi-Fi connection.

--The Bluetooth or Wi-Fi connection is poor or unstable.

--You perform no operations for approximately 3 minutes while connected.

159

Page 160
Image 160
Samsung NX1 user manual 159