Stainless steel surfaces
Do not use a
finish.
| To prevent any discolorations | |
| and/or grease stains, we | |
| recommend cleaning and | |
| removing any spills, spots, and | |
| grease from the range after each | |
| use. | surfaces |
|
| Stainless steel |
1. | Wipe off any spills | with a damp, |
| soft cloth. |
|
2. Apply an approved stainless steel | ||
| cleaner to a damp, clean cloth or | |
| paper towel. Clean a small area | |
| carefully following the instructions | |
| on the cleaner. Stainless steel | |
| should always be cleaned with | |
| the grain in the stainless steel, if | |
| applicable. |
|
3. Dry and buff with a clean, dry, soft cloth.
4.Repeat steps 2 and 3 as necessary.
Do not spray any type of cleaner into the manifold panel holes. Within these WARNING holes are ignition switches which carry the current that lights the surface
burners. Spraying into them could damage the range.
ce ianl pp rt ina a myoungi i a