Samsung NX583GOVBBPKG, NX583GOVBBB, NX583GOVBSR troubleshooting, Problem, Possible Cause, Solution

PROBLEM	POSSIBLE CAUSE	SOLUTION
Steam or smoke coming	This is normal.	The oven vent is located there.
from under the control		More steam is visible when using
panel.		the convection functions or
		when baking or roasting multiple
		items at the same time.
Burning or oily odor	This is normal for a new oven	To speed the process, set a self-
emitting from the vent.	and will disappear within 1/2	cleaning cycle for a minimum of
	hour of the first bake cycle.	3 hours. (See pages 68 and 69.)
Strong odor.	This is temporary.	The insulation around the inside
		of the oven emits an odor the
		first few times the oven is used.
Oven racks are difficult		Apply a small amount of
to slide.		vegetable oil to a paper towel
		and wipe edges of the oven
		racks with the paper towel.
		Racks become dull and hard to
		slide when they are left in the
		oven during a self-clean cycle.
Fan noise.	This is normal.	The convection fan runs until the
		function is over or the door is
		opened.
Convection fan is not		The fan starts automatically
working.		when the oven meets the
		preheat temperature.
Warming drawer	The controls are not set properly.	Reset the controls as described
will not work (Model		on page 52 and 53.
FX710BGS).
	The Self-Clean or Sabbath	The warming drawer will not
	function is being used.	operate during either of these
		operations. Try again after the
		function is completed or cancelled.
	The oven controls have been	Unlock the controls and try
	locked.	again.
	There is a blown fuse or tripped	Replace blown fuse or reset
	circuit breaker.	tripped circuit breaker.
Excessive condensation	The temperature setting is too	See page 53.
in the warming drawer	high.
(Model FX710BGS).
	The foods being warmed are not	Cover foods with a lid or
	covered with a lid or aluminum foil.	aluminum foil.
	You are trying to warm liquids.	Liquid should not be warmed in
		the drawer. Remove liquids.
Warming drawer or	The drawer is not properly	Remove and replace the drawer.
storage drawer does not	aligned with the full-extension	(See page 64.)
slide smoothly or drags.	roller guide rails or nylon drawer
	guides.
	The contents in the drawer are	Reduce the weight and/or
	too heavy.	redistribute the contents in the
		drawer.
		troubleshooting _75

ng ootiesh bl rout

(IB)FX710BGS,FX510BGS,NX583G0VB_DG68-00356A-06_EN.indd 75 2013-05-07 �� 6:24:34