Samsung NX583GOVBBB, NX583GOVBSR, NX583GOVBWW troubleshooting, Problem, Possible Cause, Solution

PROBLEM	POSSIBLE CAUSE	SOLUTION
Surface burners do not	The control knob is not set	Push in the control knob and
light.	properly.	turn it to the LITE position.
	The burner caps are not in place.	Clean the electrodes.
	The burner base is misaligned.	Put the burner cap on the burner
		head. Align the burner base.
Surface burner clicks	The control knob has been left in	After the burner lights, turn the
during operation.	the LITE position.	control knob to a desired setting.
		If the burner still clicks, contact a
		service technician.
The burners do not burn	Surface burner components and	See page 58.
evenly.	caps are not assembled correctly
	and level.
	Surface burners are dirty.	Clean surface burner
		components. (See pages 58
		and 59.)
Very large or yellow	Wrong orifice is assembled.	Contact your installer. Check the
surface burner flames.		burner orifice size and contact
		your installer if you have the
		wrong orifice. Check the LP gas
		conversion.
Surface burners light	The oven door lock is turned on.	The display will show the Lock
but oven burners do not		icon. Hold the oven door open
light.		and press the START/SET pad
		for 3 seconds. The oven will
		beep and the Lock icon will turn
		off.
	Gas Pressure Regulator shut off	Call a qualified service
	switch is in the ‘off position.	technician.
Display goes blank.	The electrical outlet Ground Fault	Replace fuse or reset circuit
	Interrupter (GFI or GFCI) has been	breaker.
	tripped and needs to be reset.
	Your digital control has been
	damaged.
Very large or yellow	The oven burner air adjustment	Call for a qualified service
oven burner flames.	shutters need to be adjusted.	technician.
	Gas supply is not properly	See the Installation Instructions
	connected or turned on.	that came with your range.
Food does not bake or	Wrong cooking mode is selected.	See page 25-26, 36, 42.
roast properly in the
	The oven racks have not been	See page 30.
oven.
	positioned properly for the foods
	being cooked.
	Incorrect cookware or cookware	See page 24.
	of improper size being used.
	Oven thermostat needs adjustment.	See page 33.
	There is aluminum foil on racks	Remove foil.
	and/or oven bottom.
	Clock or timers not set correctly.	See pages 28 and 29.

72_ troubleshooting

(IB)FX710BGS,FX510BGS,NX583G0VB_DG68-00356A-06_EN.indd 72 2013-05-07 �� 6:24:34