Y O U R N E W T V
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
ŒVHF/UHF
Connect to an antenna or to a cable TV system.
´WIRELESS HEADPHONES
Connect a pair of wireless headphones here (optional)
ˇSUPER VIDEO IN
¨VIDEO INPUTS
Video signals from VCRs, laserdisc players and similar devices (Two sets are available: Video1 and Video2).
ˆAUDIO INPUTS
Audio signals from VCRs, laserdisc players and similar devices.
∏DVD INPUT
Connect video from a DVD player.
”DVD & DTV AUDIO INPUT
Connect to the audio output jacks of a DVD player &
’DTV INPUT
(For models PCJ532RF/PCJ534RF/ PCJ611RF/PCJ614RF/PCK5315R/PCK6115R) Connects video from a
˝SURROUND OUT
Connects to the (optional)
Here are two ways to connect an audio amplifier:
1.TV - amp - speaker
2.TV - speaker(amp
ØAUDIO-VIDEO MONITOR OUTPUTS
These
signals for a recording VCR.)
Note: The monitor out does not operate in DVD or DTV mode.
CHAPTER ONE: YOUR NEW TV 1.4