Samsung PCK 6115R, PCJ 534RF, PCJ 614RF manual Storing Channels in Memory Automatic Method

O P E R AT I O N

Storing Channels in Memory (Automatic Method)

1

First, select the correct signal source (ANT, STD, HRC, IRC). See steps 1~4 on previous page.

Press MENU, then press CH ▼ twice to highlight “SET UP.”

Press VOL + to access the SETUP sub-menu. “Channel set up” will be highlighted.

2

Press VOL + while “Channel set up” is high- lighted. A new sub-menu will appear, and “Auto program” will be highlighted.

3

Press VOL + again. The TV will begin memorizing all of the available channels.

4

After all the available channels are stored, the Auto program menu reappears. Press Menu three times to exit.

Note: Channel auto program does not function when the V-chip is active.

▼ The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes.

Press VOL+ at any time to interrupt the memorization process and return to the Setup menu.

3.6 CHAPTER THREE: TV OPERATION