Customizing the Picture
ENG
| P I C T U R E | |
Select |
| Custom |
Contrast |
|
|
Brightness |
|
|
Sharpness |
|
|
Color |
|
|
Color Tone |
| Normal |
Move | Adjust | Exit |
Contrast |
| 100 |
| P I C T U R E | |
Select |
| Custom |
Contrast |
|
|
Brightness |
|
|
Sharpness |
|
|
Color |
|
|
Color Tone | Normal ® | |
Move | Select | Exit |
Normal |
| |
Your PDP has several settings which allow you to control picture quality:
◆Contrast, Brightness, Sharpness, Color, Color Tone, Tint (NTSC only).
➣When the Select is set to Custom, the following settings can be adjusted.
1Press the Menu button, then press the joystick button to enter the
PICTURE menu.
2Move the joystick up or down to select the required option.
3 | To adjust the... | Move the joystick... | |
|
|
|
|
| ◆ | Contrast | ◆ left or right. |
| ◆ | Brightness | Result: The horizontal bar is displayed. |
◆Sharpness
◆Color
◆ Color Tone | ◆ left or right to select the required option |
| (Normal, Warm1, Warm2, Cool1, Cool2). |
|
|
4When you are satisfied with the settings, press the Menu button repeatedly to return to normal viewing.
➣◆ If you make any changes to these settings, the picture standard is automatically switched to Custom.
◆In the PC mode, you can’t adjust the Color and Color Tone.
Freezing the Current Picture
Press the “Still” button to freeze the picture on a given frame.
To return to normal viewing, press the “Still” button again.
➣ In the PIP mode, both the main and sub pictures freeze.
20
