Setting the Dolby Surround, Normal Phantom Wide | Samsung PS42P2SB

Setting the Dolby Surround

This feature allows you enjoy Dolby Pro Logic surround effect fully with only surround speakers are connected to the Media Station.

This allows various modes for the main, center, surround and woofer speakers to be selected.

1Press the MENU button.

Result: The main menu is displayed.

2Move the joystick up or down until the Sound is selected.

Result: The options available in the Sound group are displayed.

3Press the joystick button.

4Move the joystick up or down until the Dolby Surround is selected. Press the joystick button.

Result: The options available in the Dolby Surround group are displayed with the Mode is selected.

5Select the Pro Logic in the Dolby Surround mode by moving the joystick left or right.

Result: The following modes are available.

Off - Virtual - Pro Logic

➣◆ When you select the Pro Logic, the following settings can be adjusted.

◆For further details of sound output depending on the each options, refer to page 34.

6Move the joystick up or down until the Mode is selected in the Pro Logic menu.

7Select the required mode by moving the joystick left or right.

Result: The following modes are available.

Normal - Phantom - Wide

➢Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.

ENG

Rear of the Media Station

		Sound
Mode		Custom
Equalizer
Auto Volume		Off
Source		Main
Sound Mode		Stereo
Dolby Surround
Headphone
Move	Enter	Menu

	Dolby Surround
Mode		Pro Logic
Mode		Phantom
Center		1
Rear		1
Time Delay		15ms
Test Tone		Off
Move	Select	Menu

	Dolby Surround
Mode		Pro Logic
Mode		Phantom
Center		1
Rear		1
Time Delay		15ms
Test Tone		Off
Move	Select	Menu

33

Image 33

Samsung PS42P2SB, PS50P2HB manual Setting the Dolby Surround, Off Virtual Pro Logic, Normal Phantom Wide

Contents

Plasma Display with Media Station User Instructions Safety Instructions Checking Parts Contents Contents For further details, refer to Switching On and Off on Viewing the Plasma DisplayPlug the mains lead into an appropriate For further details about connection, refer to pages 48~51 Viewing the Media Station Power Remote Control Buttons Installing the Display on the Wall Attachment Panel Inserting the Batteries in the Remote Control Degrees of tilt No tilt Been set to 5 degrees Been set to 15 degrees Been tilted Bolt Insulation rubber Remove four large screws from the rear side of the display Separating the Display from the Wall Attachment Panel Connecting Speakers Connecting to an Aerial or Cable Television Network Switching On and Off Becoming Familiar with the Remote Control Button Viewing Function Menu FunctionMenu Setting up your Remote Control To start the store, press the joystick button Plug and Play Choosing Your Language Lock the channels see Storing Channels Automatically Sorting the Stored Channels Storing Channels Manually Auto PAL Secam NTSC4.43 NTSC3.58D/K I M Channel mode LNA Editing the Channels Fine Tuning Channel Reception To adjust the Contrast, Brightness, Sharpness, Colour, or Adjusting the Picture SettingsChanging the Picture Standard Custom Dynamic Standard Movie Custom High Middle Low Changing the Picture Size Freezing the Current PictureStandard Full Normal Custom Colour l Colour 2 Colour Adjusting the Picture Settings PC or DVI Mode Preset to the PC mode by using the Source button Setting the Picture PC Mode Adjusting the Sound Settings Changing the Sound StandardCustom Standard Music Movie Speech Adjusting the Volume Automatically Selecting the Sound Mode Setting the Dolby Surround Off Virtual Pro LogicNormal Phantom Wide Virtual OffNormal Phantom Adjusting the Dolby Pro Logic Preferences Volume, Bass, Treble, Balance Adjusting the Headphone Preferences Adjust the each option Up or down Setting the Current TimeHearing the Melody Sound Move the joystick Switching On and Off Automatically Press the Sleep button on the remote control Setting the Sleep Timer TV AV 1 AV 2 AV 3 AV 4 AV Viewing the Picture in Picture PIP Large Small Double 1 Double Listening to the Sound of the Sub Picture Front panel Viewing Pictures From External Sources Contents Teletext Feature Displaying the Teletext Information To display Press Selecting Display OptionsSecondary page by entering its number Time/Subcode Selecting a Teletext Input Connecting to the S-Video Input Connecting to the DVD Input Connecting to the DVI Input Connecting to the Audio Output Preset Signals Connecting to the PC InputFrequency Horizontal frequency Resolution Source Video 1024 x 768 pixels Setting up Your PC Software Windows only Standard Dot x Line Vertical Horizontal Input Mode PC/DVI Pin Configurations PinSignalPin Care and Maintenance Troubleshooting After Sales Service