Setting the Picture PC Mode | Samsung PS42P2SB, PS50P2HB guide

Setting the Picture (PC Mode)

➢Preset to the PC mode by using the Source button.

ENG

1Press the MENU button.

Result: The main menu is displayed.

2Move the joystick up or down until the Function is selected.

Result: The options available in the Function group are displayed.

3Press the joystick button.

4Move the joystick up or down until the Image Lock is selected. Press the joystick button.

Result: The options available in the Image Lock group are displayed.

5Select the required option (Frequency or Phase) to be adjusted by moving the joystick up or down. Move the joystick left or right until you reach the setting.

6Move the joystick up or down until the Position is selected. Press the joystick button.

7Move the required position by using the joystick.

8Press the MENU button.

Result: The options available in the Image Lock group are displayed again.

9To replace all image settings with the factory default values, select the Recall by moving the joystick up or down. Set to OK by moving the joystick left or right.

Result: The options available in the Image Lock group are displayed again.

10To adjust the screen quality and position automatically, select the Auto Adjustment by moving the joystick up or down. Press the joystick button.

Result: The Auto Adjustment is displayed. The screen quality and position are automatically adjusted.

		Function
Language		English
Time
Size		Normal
Image Lock
Melody		On
Move	Enter	Menu

	Image Lock
Frequency		50
Phase		65
Position
Recall		?
Auto Adjustment
Move	Adjust	Menu

	Image Lock
Frequency		50
Phase		65
Position
Recall		?
Auto Adjustment
Move	Enter	Menu
		Position
	Up
Left		Right
	Down

Adjust

Menu

	Image Lock
Frequency		50
Phase		65
Position
Recall		OK
Auto Adjustment
Move	Select	Menu

	Image Lock
Frequency		50
Phase		65
Position
Recall		?
Auto Adjustment
Move	Enter	Menu
	29

Image 29

Samsung PS42P2SB, PS50P2HB manual Setting the Picture PC Mode, Preset to the PC mode by using the Source button

Contents

Plasma Display with Media Station User Instructions Safety Instructions Checking Parts Contents Contents Plug the mains lead into an appropriate For further details, refer to Switching On and Off onViewing the Plasma Display For further details about connection, refer to pages 48~51 Viewing the Media Station Power Remote Control Buttons Installing the Display on the Wall Attachment Panel Inserting the Batteries in the Remote Control Degrees of tilt No tilt Been set to 5 degrees Been set to 15 degrees Been tilted Bolt Insulation rubber Remove four large screws from the rear side of the display Separating the Display from the Wall Attachment Panel Connecting Speakers Connecting to an Aerial or Cable Television Network Switching On and Off Menu Becoming Familiar with the Remote ControlButton Viewing Function Menu Function Setting up your Remote Control To start the store, press the joystick button Plug and Play Choosing Your Language Lock the channels see Storing Channels Automatically Sorting the Stored Channels D/K I M Storing Channels ManuallyAuto PAL Secam NTSC4.43 NTSC3.58 Channel mode LNA Editing the Channels Fine Tuning Channel Reception To adjust the Contrast, Brightness, Sharpness, Colour, or Adjusting the Picture SettingsChanging the Picture Standard Custom Dynamic Standard Movie Custom High Middle Low Standard Full Normal Changing the Picture SizeFreezing the Current Picture Custom Colour l Colour 2 Colour Adjusting the Picture Settings PC or DVI Mode Preset to the PC mode by using the Source button Setting the Picture PC Mode Custom Standard Music Movie Speech Adjusting the Sound SettingsChanging the Sound Standard Adjusting the Volume Automatically Selecting the Sound Mode Normal Phantom Wide Setting the Dolby SurroundOff Virtual Pro Logic Virtual OffNormal Phantom Adjusting the Dolby Pro Logic Preferences Volume, Bass, Treble, Balance Adjusting the Headphone Preferences Adjust the each option Up or down Setting the Current TimeHearing the Melody Sound Move the joystick Switching On and Off Automatically Press the Sleep button on the remote control Setting the Sleep Timer TV AV 1 AV 2 AV 3 AV 4 AV Viewing the Picture in Picture PIP Large Small Double 1 Double Listening to the Sound of the Sub Picture Front panel Viewing Pictures From External Sources Contents Teletext Feature Displaying the Teletext Information To display Press Selecting Display OptionsSecondary page by entering its number Time/Subcode Selecting a Teletext Input Connecting to the S-Video Input Connecting to the DVD Input Connecting to the DVI Input Connecting to the Audio Output Preset Signals Connecting to the PC InputFrequency Horizontal frequency Resolution Source Video 1024 x 768 pixels Setting up Your PC Software Windows only Standard Dot x Line Vertical Horizontal Input Mode PC/DVI Pin Pin ConfigurationsPinSignal Care and Maintenance Troubleshooting After Sales Service