PROBLEM | SOLUTION | |
|
| |
Display does not | • Press the Reset button over one second to reset the memory. | |
work! | With this, the user information is not to be reset. | |
|
| |
Photos not | • If the “Memory card is connected” messages do not appear on the screen, check if | |
showing with a | the memory type is SD / SDHC / MMC / HS MMC. | |
memory card | • Check if there are photos or images stored in the memory card. | |
• Check if the images in the memory card are JPEG (JPG) types. | ||
connected. | ||
| ||
|
| |
The LCD | • This is a | |
screen turns off | • At the | |
frequently. |
| |
|
| |
There is an after | • Still images can cause permanent damage to the LCD screen. | |
image or an edge | When you select Screensavers, select a number of themes so the image changes | |
line left on the | frequently. | |
NOTE : Defects caused by this are not be covered by the factory warranty. | ||
screen. | ||
| ||
|
| |
The input point of | • Run the Touch Screen Calibration function at the Settings. | |
the touch screen is |
| |
not correct. |
| |
|
| |
After turn on the | • Click the “Dispenser OK” button which is at the bottom of display. | |
power, is possible | If the “”Dispenser OK” button is changed to “Complete”, turn the power off and on | |
to operate only the | again. It is correct to show the “Home screen”. | |
| ||
dispenser selection |
| |
button. |
| |
|
|
44_ troubleshooting
2016. 11. 19. �� 9:54 |