Samsung SCC-C6403P manual Preparing the Cables, Cable Connection, Power Adapter Cable, Video Cable

Preparing the Cables

To install and use the SCC-C6403P, the following cables should be prepared.

Power Adapter Cable

The cable that plugs into the SCC-C6403P power input receptacle has the rated voltage of AC24V, 1.5A.

Check the rated voltage before using the cable.

Video Cable

The SCC-C6403P's cable is a BNC Cable for connecting the video-output terminal to the video-input terminal of the monitor.

Cable Connection

1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT)

2. Then, connect the other end of	E
the connector to the Video Input
Terminal of the monitor.

3. Now connect the Power Adapter Cable. Use a driver to screw one part of the two lines of Power Adapter to Power Input Terminal of the SCC-C6403P.

4.Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector.

5.Connect the Remote Control Terminal of the SCC-C6403P

and the external Controller.

Controller

Adapter BOARD

2-3 2-4