5)CEILING MOUNT ADAPTOR
This adaptor is used for installing the indoor housing or the outdoor housing for the SmartDome Camera to a concrete ceiling.
6)POLE MOUNT ADAPTOR
This adaptor is used for installing the WALL MOUNT ADAPTOR
Installing the Camera
1. [Figure 1] Install the structure on the ceiling.
(Refer to Installation reference for the Length of the structure)
* Built in by the builder of the structure
[Figure 1]
2.Make a hole in the ceiling where the camera will be installed. (The hole should be about ø185)
3.[Figure 2] Assemble the
[Figure 2]
4.[Figure 3,4] Connect the various cables to the CAMERA ADAPTER. (See page
[Figure 3]
[Figure 4]
E