SHUTTER
You may designate both the fast electronic shutter speed and low electronic shutter speed in the SHUTTER menu. The fast electronic shutter supports 7 shutter speeds from 1/100(1/120) to 1/10K second to be used for the bright and fast video image. The AUTO slow electronic shutter supports 12 shutter speeds from x2 to x160 and sets the shutter speed to be slow In order to make the image on the screen more distinct and brighter when you photograph under dark illumination. If you want to sense the light brightness to control the shutter speed to the brightness automatically, select the AUTO slow shutter.
| (VIDEO SET) |
|
| |
|
|
| ||
| IRIS | ALC... |
| |
| SHUTTER |
| OFF |
|
| AGC | OFF |
| |
| WHITE BAL | ATW1 |
| |
| DIS | OFF |
| |
| FOCUS MODE | ONEAF |
| |
| SPECIAL | ... |
| |
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
Keep pressing both Left and Right in the SHUTTER menu, the speed will change in the following sequence.
➝ OFF ➝ AUTO X2... ➝ AUTO X4... ➝ AUTO X6... ➝ AUTO X8... ➝ AUTO X12... ➝ AUTO X16... ➝ AUTO X24... ➝ AUTO X32... ➝ AUTO X48... ➝ AUTO X64... ➝ AUTOX96... ➝ AUTO X128... ➝ OFF ➝ 1/100(1/120) ➝ 1/250 ➝ 1/500 ➝ 1/1000 ➝ 1/2000 ➝ 1/4000 ➝ 1/10K
❈If you set SHUTTER to between AUTO X4... and AUTO X128..., FOCUS mode will be displayed as “MF“ (the product can operate only in MF mode). You can ’t adjust the settings manually.
If you set it to OFF, 1/100(1/120)/10K or AUTO X2..., the product will recover the previous FOCUS mode.
❈If you set SHUTTER to between AUTO X2... and AUTO X128..., DIS will be displayed as
If you set it to OFF or 1/100(1/120)/10K, the product will recover the previous settings of DIS.
FLICKERLESS
Either NTSC (for 50 Hz)or PAL (for 60 Hz areas)is an
AGC
The AGC menu was designed to provide you with brighter screen supposed you photographed any subject in the dark resulting in less brighter image than regulated. AGC menu setup is available only when the SHUTTER menu is set to Fast Shutter or Off. Press either Left and Right to go to LOW or HIGH and the AGC function will be activated. LOW is use to lower the maximum AGC GAIN and HIGH raise the maximum
AGC GAIN.
| (VIDEO SET) |
|
| |
|
|
| ||
| IRIS | ALC... |
| |
| SHUTTER | OFF |
| |
| AGC |
| LOW |
|
| WHITE BAL | ATW1 |
| |
| DIS | OFF |
| |
| FOCUS MODE | ONEAF |
| |
| SPECIAL | ... |
| |
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
❈When the COLOR/BW menu of the camera set is set to AUTO..., the AGC menu item is left dotted and the maximum AGC GAIN is fixed to HIGH.
MOTION
The MOTION function is available only when the SHUTTER men is set to Slow Shutter AUTO, being composed of 5 steps, S.SLOW, SLOW, NORM, FAST, F.FAST.
●S.SLOW reduces the amount of AGC as much as possible to monitor subjects with no immobility in the dark.
●SLOW reduces the amount of AGC to monitor subjects with little immobility in the dark.
●NORM sets the amount of AGC to the middle to monitor mobile subjects in the dark.
●FAST raises the amount of AGC to monitor fast subjects in the dark.
●F.FAST reduces the amount of AGC as much as possible to monitor very fast subjects in the dark.
When the SHUTTER menu is set to AUTO, press Down to locate the cursor in the MOTION menu and press Left and Right for MOTION function setup. Press Left to the SLOW side and Right to the FAST side.
E
|
| (VIDEO SET) |
|
| |
|
|
|
| ||
|
| IRIS | ALC... |
| |
|
| SHUTTER |
| AUTOX2... |
|
|
| MOTION | NORM |
| |
|
| WHITE BAL | ATW1 |
| |
|
| DIS |
| ||
|
| FOCUS MODE | ONEAF |
| |
|
| SPECIAL | ... |
| |
|
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
|
|
➜
Press [Enter]
(FLICKERLESS)
FLICKERLESS OFF
RET
| (VIDEO SET) |
|
| |
|
|
| ||
| IRIS | ALC... |
| |
| SHUTTER | AUTO X2... |
| |
| MOTION |
| F.FAST |
|
| WHITE BAL | ATW1 |
| |
| DIS | OFF |
| |
| FOCUS MODE | ONEAF |
| |
| SPECIAL | ... |
| |
| EXIT | QUIT |
| |
|
|
|
|
|
|
|
|
|
|
