Samsung SCX-1100 manual Setting Paper Size and Type

Setting Paper Size and Type

First make sure you have paper loaded, following the instructions in “Loading Paper” on page 1.10. Then you have to set the paper size and type using the operation panel buttons.

NOTE: These settings are applied to the stand-alone copy mode only. In PC printing mode, you have to select the paper type and size in the application program you use.

Paper Size

After loading paper, take the following steps to set the paper size from the operation panel:

1Press Setup on the operation panel. The display shows the first menu: “LANGUAGE”.

2Press the Scroll buttons ( or ) until you see “PAPER SIZE” in the display.

3Press Enter. The current setting is tagged with a at the end of the display.

4Press the Scroll buttons ( or ) until you see the paper size you are using in the display.

5Press Enter to save the selection.

NOTE: When you use legal-size paper, do not pull out the paper output tray. If you do, a paper jam may occur.

3.2Copying