Samsung SCX-1100 manual Changing Default Settings

Changing Default Settings

The copy options including copy quality, contrast, number of copies and copy size can be set to the most frequently used modes. When a document is copied, the default settings will be activated unless otherwise changed by using the corresponding buttons on the operation panel.

To create your own default settings:

1Press Setup.

2Press the Scroll buttons ( or ) until you see “MAINTENANCE” on the display, then press Enter.

3Press the Scroll buttons ( or ) until you see “DEFAULT SETUP” on the display, then press Enter. The first setup menu “CONTRAST” appears.

4Use the Scroll buttons ( or ) to scroll through the setup menu available.

5When the desired menu appears, press Enter to access the menu.

6Change settings using the Scroll buttons ( or ) and then press Enter to save the selection.

7Repeat steps 4 through 6 as necessary.

8To return to Standby mode, press Cancel/Reset.

NOTE: When you adjust the copy settings or set special copy options, if you press Cancel/Reset, the settings are cancelled and return to their default settings.

Copying 3.13