3 Use a clean cloth, dampened with water only, to gently clean the entire copper coloured area, including the nozzles and contacts.
To dissolve any dried ink, place the cartridge on a heavy damp cloth as shown below and push the cartridge with light pressure to let the nozzles in contact with the cloth for about three seconds. Then gently blot and wipe dry.
If you are cleaning a colour print cartridge, be especially careful to wipe the nozzles in only one direction so the colours do not mix.
Nozzles
Contact area
4 Allow the copper-coloured area to dry.
5 Reinstall the print cartridges and close the cartridge door. The display prompts you to confirm “NONE CHANGED?”. Press Enter. The display returns to Standby mode.
6 Print a cleaning page and examine the cleaning pattern by following the instructions on page 6.3. If the line is still broken, clean the print cartridge holder contacts in your product.
NOTE: Once the cartridges are removed and installed, cartridge alignment may be required. After you clean the cartridge, if necessary, align the cartridges.
Maintenance 6.7
