13.10 <

Maintenance>

Managing the Department Codes

1Press Menu until Admin Setup appears on the bottom line of the
display and press OK.
2Press the Scroll buttons until Department Codes appears and
press OK.
3Press the Scroll buttons until Management appears and press OK.
4The following options are available:
- Department Mode: allows you to enable or disable the department
code feature.
- Delete Dept. Code: deletes the department user code.
- Clear Dept. Report: clears all the reports of usage on the machine.
- Change Master Code: allows you to delete or change the master
code. If you want to change the master code, enter a new master
code number.

Change Password

This menu allows you to change the password used for the protecting the
Admin Setup menu.
1Press Menu until Admin Setup appears on the bottom line of the
display and press OK.
2Press the Scroll buttons until Change Password appears and
press OK.
3Enter a new 8-digit password and press OK.
4Re-enter the password to confirm it and press OK.
5Press Stop/Clear to return to Standby mode.