14.4 <

Troubleshooting>

In the multi-purpose tray

1If the paper is not feeding properly, pull the paper out of the
machine.
2Open and close the front cover to resume printing.

In the fuser area or around the toner cartridge

Note
The fuser area is hot. Take care when removing paper from the
machine.
1Lift the release lever to open the side cover.
2Pull down on the fuser lever as shown below.
This will release pressure on the paper.
If paper is not seen in this area, skip to the Exit Area.
Note
Do not pull paper up through the fusing unit. Unfused toner may
adhere to the area, resulting in smudged copies.
3Remove the jammed paper, in the direction shown.
4Push the fuser lever up, and then close the side cover.
5Open and close the front cover to resume printing.

In the paper exit area

1Press the release lever to open the side cover.