14.3 <

Troubleshooting>
3Pull the release lever to open the side cover.
Note
Do not touch the shiny drum cartridge surface. Scratches or
smudges will result in poor copy quality.
4Carefully remove the misfed paper in the direction shown.
5Close the cover and insert the paper Tray. Lower the rear part of the
Tray to align the rear edge with the corresponding slot of the
machine, then insert it completely.

In the optional tray 2

1Pull the optional tray 2 open.
2Pull the paper Tray to open. After you pull it out completely, lift the
front part of the Tray slightly up to release the Tray from the
machine.
If the paper does not move when you pull, or if you do not see the
paper in this area, stop and go to step 3.
3Pull the tray 1 half.
4Remove the paper in the direction shown. To avoid the paper torn,
pull it out gently and slowly.
To clear paper jam in Tray 2, follow the instructions on page 14.3.