Samsung SDC5440BC user manual Connecting and Setting the network, When no router is used

OK Cancel

main menu

Connecting and Setting the network

Networking may differ from the connection method, check your environment before setting the connection mode.

When no router is used

• Static iP mode
- Internet connection : Static IP ADSL, leased line, and LAN		Connection Mode
environments allows connection between the DVR and
	Connection		Protocol
remote user.
		 Connection Mode	Static IP
- DVR Network Settings : Set the <Connection mode> in		 Bandwidth
<Connection> menu of the connected DVR to <Static iP>.			2Mbps
		 Gateway	192.168.1.1
		 IP	192.168.1.200
` Consult your network manager for IP, Gateway and Subnet Mask.
		 DNS	Manual	168.126.63.1
		 Subnet Mask	255.255.255.0
• Dynamic iP (DHCP) mode

- Internet connection : Connect the DVR directly to a cable modem, DHCP ADSL modem or FTTH network.

- DVR Network Settings : Set the <Connection mode> in <Connection> menu of the connected DVR to <Dynamic iP>.

•aDSL (PPPoe: iD and password certification)

-Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection requires user ID and password.

-DVR Network Settings : Set the <Connection mode> in <Connection> menu of the connected DVR to <aDSL>.

`<User ID> and <Password> should be the same to the ADSL user information.

If you don’t know the ID and password, consult your ADSL service provider.

Connection Mode
Connection	Protocol
 Connection Mode	ADSL
 Bandwidth	600kbps
 IP	192.168.1.200
 Gateway	192.168.1.1
 Subnet Mask	255.255.255.0
 DNS	Manual	168.126.63.1
 User ID	ID
 Password	************
	OK	Cancel

64_ main menu