Error information, Live Screen menu | Samsung SDC5440BC guide

live

	Name	Description
f	Camera Name/ Channel	Displays the camera name and the changed channel, if any.
		Displays the resolution of the recording screen. (Page 55)
		Displays AUDIO ON/MUTE.
g Camera Operation		Not displayed in video mode if deactivated.
g Camera Operation		Displayed if a motion detected in the condition that the motion detection is set to
		<ON>.
		Displays the current record mode from Record/Event/Schedule.

error information

•If the internal HDD is not connected, the “NO HDD”( ) message will appear; if there occurs a problem, you will see the “HDD FAIL”( ) message in the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.

M ` If you see NO HDD, HDD FAIL icons on the screen, contact the service center for more details.

Live Screen menu

In addition to the buttons on the remote control, you can access a desired menu by right-clicking the mouse any area in live mode.

The context sensitive menu that appears by right-clicking the screen may differ, depending on the login/ logout, screen split mode and DVR operation mode.

M ` Menu items of Search, Record, Backup and Shutdown can be deactivated, depending on the user permission.

2012-01-01 01:10:25

Scene Mode 

Spot Out 

Audio Off

Freeze

Stop Alarm

Record

Play

Search

Backup

Main Menu

Shutdown

Hide Launcher

Logout

< Split Mode Menu >

2012-01-01 01:10:25

Scene Mode 

Spot Out 

Zoom In

Audio off

Freeze

Stop Alarm

Record

Play

Search

Backup

Main Menu

Shutdown

Hide Launcher

Logout

< Single Mode Menu >

24_ live

Image 24

Samsung SDC5440BC user manual Error information, Live Screen menu

Contents

Channel DVR SDS-V4040 Channel DVR Important Safety Instructions Overview Overview Before Start System Shutdown Contents Backup viewer Search & playWeb Viewer Appendix Features Standards Approvals Package Contents Input the remote control signal PArT nAmeS And funCTionS fronT Part Names and Functions Rear Power Channel Changing the Remote Control ID Installation Checking the Installation Environment ConneCTinG The video, Audio And moniTor ConneCTinG The uSBConneCTinG wiTh OTher deviCe ConneCTinG The CAmerA SdC-5440BC Lens Installing the camera Connecting with dvrConneCTinG wiTh oTher deviCe Connect the camera cable to the camera Up with impuritiesCondensation Connecting the Network Connecting to network through Ethernet 10/100BaseTTher htodevi wig in ct c !onne Connecting to the Network using the router Connecting to Network through Adsl GeTTinG STArTed Starting the systemShutting down the System Login Locking All ButtonsLive mode, right-click any area of the screen You will see the context sensitive menu as in the right Live Screen Configuration Icons on the Live Screen Error information Live Screen menu Split mode menu Login/Logout You can log in or out LiveRecord/Stop Starts/stops the standard recording Play Shutdown Turns down the DVR Single mode menu Single mode menu is available only in Single ModeMenu Description Full Screen Zoom Enlarges the selected image. ` The Launcher menu can be accessed only by using the mouse Date/Time/Language Time. Screen ModeCurrent mode is highlighted in white View the Launcher menu Live Mode Switching the screen modeSwitching the split mode Auto Sequence Manual Switching Channel Setting Switching to Single Mode Selecting a Spot out mode SpoT ouTZoom Audio On/Off in Single mode Audio On/OffFreeze Event Monitoring Performed Live SYSTem SeTuP Setting the Date/Time/LanguagePress the menu button on the remote control Date/Time/Language DST Set up Daylight Saving Time with its period to make Date Sets the date that will appear on the screenYou can select the date format Screen Setting Holiday Using the Calendar Setting the administrator Using Virtual KeyboardPermission management Setting the Group To set the group authority To change the user password To restrict the user permissionsMain menu Select user menu Setting the user When the user setup is done, press OK Setting Permissions System management Checking the System information Center for assistance Updating progresses with 3 steps as shown in the figure Settings Log informationSystem Log Backup Log Event Log SeTTinG THe DeViCe Setting the CameraCamera When the camera setup is done, press OK To set the area using individual selection③ When completing the privacy zone settings, click OK To set the privacy region Storage Device Confirming DevicesYou can check information on storage devices Formatting You can format a storage deviceSelect Format HDD alarm Remote Devices Setting the monitor Setting Display positionMonitor Setting the Spot Out Setting the Screen mode SeTTinG THe ReCORDinG Recording Schedule Event Record Duration Recording Color Tags ReC Quality & Resolution Setting Standard Recording PropertiesSetting event Recording Properties When the Event recording setup is done, press OK Disk End Mode If selected Overwrite, recording will Record OptionFull SeTTinG THe eVenT Setting the motion Detection area③ When the motion detection setup is done, press OK Motion Detection Alarm Schedule Window of alarm Schedule settings appearsAlarm. On Marked in orange, and always generates alarm on BaCKuP Setting the BackupYou can backup the desired data to a connected device NeTWORK COnFiGuRaTiOn Connection modeSetting the Connection You can set the network connection route and protocol Setting the Protocol UDP Notification Select one between 4505 and 4530 for RtspNetwork Overview DVR 1st Set Port Forwarding Setting 2nd Set Port Forwarding Setting Connecting and Setting the network When no router is used When a router is used Internal Port Range Set the same to the external Port Range Network English ` Refer to Using Virtual Keyboard. When the Ddns setup is done, press OKDDnS Be displayed Type your set ID in Product iD field DDnS Setting IPOLiS DDnS Setting Live Transfer Mailing Service SmTP Setting Event Setting Group SettingSet the value Event Interval Set the event interval Interval, not on each event Recipient Setting When the recipient setting is done, press OK SeaRCH Time Search Detailed mode above Event SearchZoom In The map enlarges in detail Hours Backup Search Motion Search @ button on the remote control PLaYBaCKPlay Using the Playback Button M n What is Web Viewer? Product FeaturesIntroducing Web Viewer System Requirements Connecting Web VieWer MAc Safari on MAc USing liVe VieWer MAc Connecting Web VieWer WindoWS ` All settings are applied by the DVR’s settingsClick install Activex control… DVR into the URL address box USing liVe VieWer WindoWS Single Mode Quad Mode OSd information displaySplit-Screen Setting the display of the oSd time information Changing the live Screen ModeConnected dVr Saving the live Screen on the Pc CAPture Saves the current screen into a BMP or Jpeg file Changing the live Screen channel Button and then select USing SeArch VieWer Exceeded Web Viewer\VideoClip\Search. To change the saving path \users\user Searching the recorded Video in the calendar Check duplicatesSearching the recorded Video in the timeline VieWer SetuP SystemControlling Playback C d G h Date/time/language Holiday Permission Management System Management Device Camera Storage device Remote device Monitor For more information, refer to Setting the recording. RecordRecording Schedule Event record duration Rec Quality & resolution EventRecord option Motion detection Alarm Schedule You can set the alarm output time if a video loss occursVideo loss detection Motion region Set the target motion detection area For more information, refer to network configuration. NetworkConnection DdnS Mailing Service Live transfer About What is Mobile Viewer? Using a SmartphoneMobile Viewer Key Features Compatible Smartphone Sec bAcKuP VieWer Recommended System requirements You can adjust the volume level from 0 to You can enable the De-interlace functionSpeed will restore to Between activated and deactivated Stop playing temporarily Product Specification Camera SDC-5440BCN SDC-5440BCP Product Specificationdvr 6, 8, 9, 13, PIP, SequenceRecording NTSC120fps, PAL100fps Bandwidth RTP, RTSP, HTTP, CGI 500GB Sata HDDVGA Hdmi USB Default Setting Management Category Details Factory Default DurationOFF Smtp Troubleshooting By the service personnel Quick start guide backup, searchIcon on the launcher to switch to Live mode Endixapp On the screen 4CIF2CIFCIF Open Source License Report on the Product GNU General Public LicensePreamble No Warranty How to Apply These Terms to Your New ProgramsEND of Terms and Conditions Terms and Conditions Conveying Verbatim Copies Conveying Modified Source Versions Acceptance Not Required for Having Copies GNU Lesser General Public License Limitation of LiabilityPage How to Apply These Terms to Your New Libraries OpenSSL LicenseOriginal SSLeay License Page Correct disposal of batteries in this product Page Sales Network Samsung Techwin America Inc