Samsung SDC5440BC Connecting Web VieWer WindoWS, DVR into the URL address box, Web Viewer

Web Viewer

connecting Web VieWer (WindoWS)

1. Open your web browser and type the IP address or URL
of DVR into the URL address box.
M The basic URL of the DVR is as following in case of MAC address	http://www.samsungipolis.com/HOMEDVR
:

`http://www.samsungipolis.com/User ID

`You can also use registered URL which setups up in the Setup menu of your DVR.

2.Set the Admin ID and password same to those of the DVR Admin.

For general users, enter the DVR user ID and password.

J	` The default password can be exposed to a hacking thread so
	it is recommended to change the password after installing
	the product.
	Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
M	` It allows up to 10 simultaneous access including the Admin and general users.
	` It does not allow multiple login of the Admin user.
	` Initial password of the Admin user is set to “4321”.
	` Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.
	` Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the
	Web Viewer. (Page 37)
	` All settings are applied by the DVR’s settings.

3. Click <install Activex control…>.

Downloading Active-X control may take several minutes according to the security settings on your PC.

4. Click <install>.

5. You may have “Windows Security Alert” that attempts to

block this with the Windows Firewall. In that case, click <unblock> to start Web Viewer.

6. Installation is complete.

Now you can see the main screen of Live Viewer.

82_ Web Viewer