Samsung SDC5440BC user manual Mailing Service, SmTP Setting

mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.

M ` If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.

`The e-mail receivers are not able to adjust the attached image quality.

SmTP Setting

Sets the SMTP mail server.

Using the mouse may help make setup easier.

1. In the <network> setting window, press the up/down
	Mailing Service
($%) button to move to <mailing Service> and press the
		SMTP	Event		Group		Recipient
[enTeR] button.
		 ServerType	SMTP mail Server
		 Server
2. Select <SmTP>.		 Port
					25
You will see the SMTP setting window.
		Use Authentication
		User
3. Use direction buttons ($%_ +) to move to a desired item		Password
		 Secure Transfer
			Never
and set the value.		 Sender				ex. user@example.net
• ServerType : Displays the connected server type.		TEST
• Server : Enter a server to connect to.				OK	Cancel

•Port : Sets the communication port.

•Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

•User : Enter a user to use authentication when connecting to the SMTP server.

•Password : Enter the password of the SMTP server user.

•Secure Transfer : Select one from <never> and <TLS (if available)>.

•Sender : Use the virtual keyboard to enter the sender’s e-mail address. ` Refer to “Using Virtual Keyboard”. (Page 37)

•TEST : Conducts the test on the server settings.

4.When the SMTP setting is done, press <OK>.

!main menu

English _71