Samsung SDC5440BC user manual SeTTinG THe DeViCe, Setting the Camera

main menu

SeTTinG THe DeViCe

You can configure the settings of: Camera, Storage Device, Remote Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

1.Press the [menu] button on the remote control.

2.Use the left/right button (_ +) to select <Device>. Device setting menu is selected.

3.Use the up/down buttons ($%) to move to <Camera>, and press [enTeR] button.

Logout

Device

Camera

Storage Device

Remote Device

Monitor

Return

4.	Select <Camera>.
	You will see a window where you can configure the
		Camera
	camera settings including Video, Audio, Channel Name,
		Camera
	SEQ-Dwell Time and Privacy Region.
5.		CH	Video 			Audio 		CH Name	SEQ-Dwell Time 
	Use direction buttons ($%_ +) to move to a desired	1		ON		OFF		CAM 01	5 sec	
		2		ON		OFF		CAM 02	5 sec	
		3		ON		OFF		CAM 03	5 sec	
	item, and set the value.
		4		ON		OFF		CAM 04	5 sec	
		5		ON		OFF		CAM 05	5 sec	
• Video		6		ON		OFF		CAM 06	5 sec	
		7		ON		OFF		CAM 07	5 sec	
		8		ON		OFF		CAM 08	5 sec	
	- <On/OFF> : You can turn ON/OFF the selected channel’s
		Screen Setup				Privacy Region
	camera.
	- <Covert1> : Shows information other than the video of					OK		Cancel
	the selected channel.

`For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

•Audio

-If set to <On>, you can turn the audio of the channel ON on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

•CH Name : Up to 15 characters including blanks are allowed. ` Refer to “Using Virtual Keyboard”. (Page 37)

•SEQ-Dwell Time : You can set the dwell time between channels for the Live screen. ` If set to <OFF>, the channel is not listed in the Auto Sequence mode.

46_ main menu