Samsung SDC5440BC user manual Remote Devices, HDD alarm

main menu

HDD alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

Using the mouse may help make setup easier.
1.	Use the up/down buttons ($%) in <Device> window to
		Storage Device
	move to <Storage Device>, and press [enTeR] button.
			Device	Format		HDD Alarm
2.	Select <HDD alarm>.
			 Check Alarm Output Port		BEEP
	A window for setting HDD check and replace output ports
			 Duration		OFF
	and their durations appears.
3.			 Replace Alarm Output Port		BEEP
	Use direction buttons ($%_ +) to move to the desired		 Duration
					OFF
	item.
• Alarm
					OK Cancel
	- If <BeeP> was selected, a beep will sound.

•Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

•Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

•Duration : Sets the alarm duration for the alarm signal and beep sound.

M	` <Check> status means that the HDD is operating but it has problems that require technical examination.
	(	) appears on the Live screen.

`<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

4.When the HDD Alarm setup is done, press <OK>.

Remote Devices

You can set the Remote Control ID with the DVR.

Using the mouse may help make setup easier.

1.Use the up/down buttons ($%) in <Device> window to move to <Remote Device>, and press [enTeR] button.

2.Use direction buttons ($%_ +) to move to the desired item, and press [enTeR] button.

3.Make sure to match IDs of the DVR and Remote Control, and press <OK>.

M	` For changing the remote control’s ID, refer to “Changing the
	Remote Control ID”. (Page 13)

Remote Device

Remote Control		ID
	ON		0

OK Cancel

50_ main menu