02 Instruments and controls

Left-side steering wheel lever

02

Lever positions

G026954

Turn signals, lane change position

Turn signals, position for normal turns

High beam flash

Toggle between high and low beams, Home Safe lighting

Turn signals

When turning

Move the lever as far up or down as possible (to position 2) to start the turn signals. The turn signals will be cancelled automatically by the movement of the steering wheel, or the lever can be returned to its initial position by hand.

When changing lanes

The driver can automatically flash the turn sig- nals 3 times by:

Moving the turn signal lever up or down to position (1) and releasing it.

Moving the lever up or down to position (2) and immediately back to its original posi- tion.

NOTE

This automatic flashing sequence can be interrupted by immediately moving the lever in the opposite direction.

If the turn signal indicator flashes faster than normal, check for a burned-out turn signal bulb.

High/low beam headlights

Continuous high beams

1.

Turn the ignition key to position II.

 

2.

 

 

 

With the light switch in position

 

, (see

page 67) pull the turn signal lever toward the steering wheel to toggle between high and low beams.

High beam flash

1.Turn the ignition key to position II.

2.Pull the turn signal lever to position (3). The high beams will remain on until the lever is released.

Home safe lighting

When leaving your vehicle at night, home safe lighting can illuminate the area in front of the vehicle.

1.Remove the key from the ignition switch.

2.Pull the turn signal lever as far as possible toward the steering wheel and release it.

3.Exit the vehicle and lock the doors.

The headlights and parking lights will illuminate and remain on for 301, 60 or 90 seconds. The time interval can be changed by a trained and qualified Volvo service technician.

1Factory setting

70

Page 70
Image 70
Volvo XC90 owner manual Left-side steering wheel lever, Lever positions, Turn signals, High/low beam headlights