02 Instruments and controls

Mirrors

Rearview mirror

G026660

To reduce glare from the headlights of follow- ing vehicles, use the control to switch between the normal and night-driving positions.

NOTE

This function is automatically switched off when the gear selector is placed in the Reverse position.

Rearview mirror with compass*

or when the engine is running. The compass can be switched off or on by pressing the inset button on the rear side of the mirror (see the inset illustration). This can be done with straightened paperclip or similar object. The button is recessed approximately 1 in. (2.5 cm) in the mirror.

02

Normal position

G026965

G026409

Night position, reduces glare from follow- ing headlights

Autodim function*

The autodim function reacts to headlights from following traffic and automatically reduces glare.

The upper left-hand corner of the rearview mir- ror has an integrated display that shows the compass direction toward which the car is pointing. Eight different directions can be dis- played: N, NE, E, SE, S, SW, W and NW. The display shows your car's orientation with respect to true north.

If the compass is activated, it will be displayed automatically when the ignition is in postilion II

Magnetic zones

The earth is divided into 15 magnetic zones. The compass is initially set for the zone to which the car was delivered, and should always be adjusted if the car is driven to a new magnetic zone. To do so:

1. Switch the ignition to position II.

￿￿

* Option/accessory, for more information, see Introduction.

83

 

 

Page 83
Image 83
Volvo XC90 owner manual Mirrors, Rearview mirror with compass, Autodim function, Magnetic zones