Volvo XC90 Bass speaker Subwoofer, Surround Pre, Equalizer FR, EQ Front certain audio systems

10

10 Audio

Audio system controls

Setting			Shown in the dis-	•	Dolby Surround Pro Logic II functions in		ries Licensing Corporation. Dolby Surround
					CD mode only.		Pro Logic II is manufactured under licence from
			play
				•	2-channel stereo is recommended for AM/		Dolby Laboratories Licensing Corporation.
Balance between			FADER
					FM radio broadcasts.
the front and rear				•	Dolby Surround Pro Logic II is only availa-		Bass speaker – SUBWOOFER*
speakers					ble on the highest level audio system –		The subwoofer helps the system provide fuller
Bass speaker level			SUBWOOFER*		Premium Sound.		sound and deeper bass.
				Use the following instructions to select PRO
							1.	Select AUDIO SETTINGS in the menu and
Center speaker level			CENTER (Premium
				LOGIC II, 3-CHANNEL, or to turn these func-
								press ENTER.
			Sound system only)	tions off. See also the menu structure on page
							2.	Select SUBWOOFER and press ENTER.
Surround sound			SURROUND (Pre-	264.
				1.	Select AUDIO SETTINGS in the menu and		See page 247 for information on setting the
level			mium Sound system
			only)		press ENTER.		subwoofer level.
				2.	Select CD SURROUND and press		Equalizer FR
SURROUND MODE					ENTER.		EQ – FRONT (certain audio systems)
Surround sound settings are used to balance				3.	Select PRO LOGIC II, 3-CHANNEL, or		This function is used to fine-tune the sound
sound levels throughout the vehicle. Surround					OFF and press ENTER.		from the front speakers.
settings for the various sound sources are				4.	The symbol	PL II is displayed when	1.	Select AUDIO SETTINGS in the menu and
made separately.
					Pro Logic II is selected.			press ENTER.
There are three settings for surround sound.
				5.	3-CHis displayed when 3-channel stereo		2.	Select Equalizer FR and press ENTER.
•	PRO LOGIC II
					is selected.		3. Use the menu selection buttons to set the
•	3-CHANNEL
				6.	OFF indicates normal stereo mode.			level or use the SELECTOR control.
• OFF (2-channel stereo)				Dolby noise reduction is manufactured under			4. Press ENTER to select the next frequency.
The		symbol in the display indicates that
				license from Dolby Laboratories Licensing Cor-				You can select five frequencies.
Dolby Surround Pro Logic II is activated.				poration.			5. Press ENTER until you come to the menu
				"Dolby Surround Pro Logic II", and the double-				mode to save the changes you have made.
				D symbol are trademarks of Dolby Laborato-

248* Option/accessory, for more information, see Introduction.