09 Maintenance and servicing

Replacing bulbs

09

5.Insert the new bulb (without touching the glass) in the holder.

6.Move the retaining spring up and push it slightly to the left until it seats properly.

7.Press the bulb holder into place on the headlight housing.

3.Remove the connector from the bulb unit by pressing the lock tab out and pulling.

4.Connect the connector to the new bulb unit until it clicks into place.

5.Press a new bulb unit into the headlight housing and turn it clockwise into place.

3.Align the guide lugs on the side of the base of the new bulb in the grooves in the holder and press it into place.

4.Press the lamp holder into the place in the headlight housing and turn it approxi- mately 1/4 turn clockwise.

8. Press the rubber cover into place.

6. Reinstall the plastic cover.

Replacing the turn signal bulb

Replacing the high beam bulb (Active Bending Lights)

G027090

1.Remove the rubber cover over the bulb by pulling it off.

2.Turn the bulb holder counterclockwise and pull it out of the headlight housing.

Replacing parking light/side marker light bulbs

G028409

1.Turn the lamp holder approximately 1/4 turn counterclockwise and pull it out of the headlight housing.

2.Pull the bulb straight out.

G027089

1.Turn the lamp holder approximately 1/4 turn counterclockwise and pull it out of the headlight housing.

2.Press in the bulb slightly and pull it out of the holder.

￿￿

225

Page 225
Image 225
Volvo XC90 owner manual Replacing parking light/side marker light bulbs