Volvo XC90 owner manual Trip computer

02 Instruments and controls

Trip computer

Trip computer*

G026956

READ (press to acknowledge/confirm/ erase a message)

Thumb wheel (used to scroll among the trip computer menus)

RESET

The trip computer stores information gathered from several systems in your vehicle and has four menus that can be displayed in the text window.

•Driving distance on current fuel reserve

•Average fuel consumption

•Current fuel consumption

•Average speed

•Current speed in mph (Canadian models only)

•DSTC (see page 152 for detailed informa- tion)

NOTE

Warning messages from the vehicle's moni- toring systems will override the trip com- puter function. If a warning message is dis- played in the text window while you are using the trip computer, you must acknowl- edge the message by pressing button A. Press button A again to return to the trip computer function.

1.Trip computer controls and functions The trip computer functions can be accessed by twisting INFO (B) one step at a time in either direction. Twisting a final time returns you to the original function.

The trip computer can be reset (current data will be erased from system memory) by press- ing RESET (button C).

2.Driving distance on current fuel reserve

This function shows the approximate distance that can be driven on the fuel remaining in the tank. The calculation is based on average fuel consumption during the last 20 miles (30 km)

of driving and the amount of fuel remaining in the tank when the reading was taken.

02

When "----"is displayed in the text window,

refuel as soon as possible.

3. Average fuel consumption

This value indicates fuel consumption since the last time the trip computer was reset (by press- ing RESET, button C). When the engine is switched off, information on fuel consumption is stored and remains in system memory until the RESET (button C) is pressed again.

4. Current fuel consumption

This value indicates the current fuel consump- tion, based on readings taken once per sec- ond. When the vehicle is not moving, "----" will

be displayed.

5. Average speed

This value indicates average speed since the last time the trip computer was reset (by press- ing RESET, button C). When the engine is switched off, information on average speed is stored and remains in system memory until the RESET (button C) is pressed again.

￿￿

* Option/accessory, for more information, see Introduction. 75