Volvo XC90 owner manual Jack attachments, Changing a wheel

07 Wheels and tires

Changing wheels

G026997

Jack attachment points

Jack attachments

There are two attachment points for the jack on each side of the vehicle. These attachment points are under the center of each door.

G020332

WARNING

The undersides of accessory running boards are not intended for attaching the jack.

4.Remove the wheel cover (where applica- ble) using the lug wrench in the tool bag.

5.With the wheels still on the ground, use the lug wrench to loosen the wheel bolts 1/2 – 1 turn. Turn the bolts counterclockwise to loosen the bolts.

G027000

WARNING

There is an attachment point on each side of the vehicle located under the pillars between the front and rear doors. This point is used during the production process only, and is NOT intended for attaching the jack.

Changing a wheel

1.Park the vehicle on a firm, level, non-slip- pery surface.

2.Engage the parking brake and put the gear selector in the Park position.

3.Loosen the wheel bolts by exerting down- ward pressure on the lug wrench.

Attaching the jack

6.Place the jack on the ground, under one of the attachment points (see the illustration) and crank while simultaneously guiding the jack's attachment bracket onto the attach- ment point (see illustration) The base of the jack must be flat on a level, firm, non-slip- pery surface. Before raising the vehicle,

07

￿￿

193