Volvo XC90 owner manual Front seats, Massage, Lumbar support

04 Interior

Front seats

3.With the MEM button depressed, press button 1 briefly to store the seat's current position.

To move the seat to the position that it was in when button 1 was programmed:

Press and hold down button 1 until the seat stops moving.

As a safety precaution, the seat will stop auto- matically if the button is released before the seat has reached the preset position.

Front seats*

G030180

Massage

Lumbar support

Massage

G030183

Massage control

Firm massage

Gentle massage

Each front seat has a massage function in its backrest. The massage action is done with air cushions, which can be adjusted to a firm or gentle setting. When the setting has been made, the massaging action is carried out in cycles as follows: massage 6 minutes – pause 4 minutes – massage 6 minutes, etc.

When the button is in the center position or if the ignition is in position 0, the massage func- tion is switched off.

Lumbar support

G030229

Lumbar support control

The lumbar support uses the same air cushions as the massage function. The button can be used to adjust the amount of support in four directions, as shown in the illustration.

Lumbar support can be only be adjusted when the massage function is switched off.

A memory function stores the lumbar support setting and this support will resume after the massage function has been switched off or after the vehicle has been parked for an extended period of time.

04

* Option/accessory, for more information, see Introduction. 107