Delayed transmission

You can configure your machine to send a fax at a specified time. Up to 50 delayed transmission operations can be reserved in your machine.

1.Place the document face down in the automatic document feeder. If desired, adjust the resolution and contrast. For details, see page 2.8.

2.Press Menu, then press Delay TX on the one-touch keypad.

3.Enter the telephone number of the remote machine. There are several methods available to do this:

Direct entry of the telephone number using the numeric keypad.

One-touch keypad dialing of stored telephone numbers (see one-touch dialing on page 2.31)

Group and speed number dialing using the numeric keypad (see speed dialing on page 2.33 and group dialing on page 2.34)

Note: You can use only one group number at this transmission job in step 3.

4.Press Start/Enter.

The display prompts you to enter another fax number.

ANOTHER

FAX NUMBER ?

5.If you have entered the last fax number setting, press Stop. Or

If you want to send the document to more than one location, press Start/Enter and enter another fax number using the numeric keypad, one-touch keypad, or speed dial number.

The number appears in the display.

Repeat step 5 until you have entered the last fax number setting and pressed Stop.

6.The display prompts you to enter an ID for the transmission. If you want to assign a name to the transmission, enter it using the number keypad. If not, proceed to step 7.

For details on how to enter letters using the number keypad, see entering alphanumeric characters on page 2.4.

2.12 Sending a fax

Page 43
Image 43
Samsung SF-6800 manual Delayed transmission, Another FAX Number ?